There is no preparation required (knots to tie etc.) ...
- Feed one end of the cord through the restraint until it reaches one of the knots
- Place the foot loops over the toe part of your shoes or if barefoot between the big toe and increase the tension of the cord so it positions itself on the lower part of the restraint to avoid friction injuries
- Now move your feet in a slow pedal motion and gradually build up speed
- The heat from the friction will burn through the restraint
Tip: For silently removing cable-ties and nylon rope you do not need to use the cutting knots. Keep within the two knots to keep the noise to a minimum. Add a cutting knot to the middle of the necklace for natural rope and cord (hemp etc.)
The Technora Escape Necklace also features the Micro Striker Bead Tungsten Carbide (MSB-TC) for breaking tempered glass windows (car side windows). Concealed inside the plastic breakaway connector the MSB-TC is hidden until you require it. To deploy you pull on the cord either side of the breakaway connector to pull apart. The MSB-TC is seated inside the female part. Simply pull the plastic female part down the cord and past the first cutting knot whilst holding onto the MSB-TC. Now wrap the cord around your hand and leave about 12 inches of cord hanging free with the MSB-TC on the end. Swing the MSB-TC towards the glass - very little force is required as the mineral hardness of the MSD (9.5 MOHS) is greater than glass (will punch a hole in a glass bottle!). You can use this to escape from a car or rescue persons from a car (the friction saw will cut seat-belts).
Silicone Retainers fitted as standard to carry the tools (Light Sticks, Bogota Picks, Shims, Modified Hair Grip, Handcuff keys etc.)